TRANSMISSION CONTROL CABLE > REPLACEMENT |
| 1. REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY |
| 2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
Remove the parking brake hole cover sub-assembly (Click here).
| 3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Remove the upper console panel sub-assembly (Click here).
| 4. REMOVE CONSOLE BOX ASSEMBLY |
Remove the console box assembly (Click here).
| 5. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() |
Move the shift lever to L.
Disconnect the control cable from the shift lever.
Remove the lock clip and disconnect the control cable from the bracket.
![]() |
Remove the 2 nuts and disconnect the control cable from the vehicle body.
![]() |
Remove the nut and disconnect the control cable from the vehicle body.
![]() |
Remove the lock clip and control cable bracket.
Remove the nut and control cable.
| 6. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY |
Install the control cable with the nut.
Install the control cable bracket and lock clip.
![]() |
Connect the control cable to the body with the nut.
![]() |
Connect the control cable to the body with the 2 nuts.
![]() |
Connect the control cable to the bracket with the lock clip.
Move the shift lever to L.
Install the control cable to the shift lever.
| 7. ADJUST SHIFT LEVER POSITION |
Adjust the shift lever position (Click here).
| 8. INSPECT SHIFT LEVER POSITION |
Inspect the shift lever position (Click here).
| 9. INSTALL CONSOLE BOX ASSEMBLY |
Install the console box assembly (Click here).
| 10. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Install the upper console panel sub-assembly (Click here).
| 11. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
Install the parking brake hole cover sub-assembly (Click here).
| 12. INSTALL TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY |