HOOD > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT HOOD SUB-ASSEMBLY


  1. Check that the clearance measurements of areas A to F are within the standard range.


    B085264E02


    Standard:

    Area
    		Measurement
    		Area
    		Measurement
    A (Reference)
    		6.0 +- 1.5 mm (0.236 +- 0.059 in.)
    		D
    		0.3 +- 1.5 mm (0.012 +- 0.059 in.)
    B
    		0.7 +- 1.5 mm (0.028 +- 0.059 in.)
    		E (Reference)
    		6.0 +- 1.5 mm (0.236 +- 0.059 in.)
    C
    		4.0 +- 1.5 mm (0.157 +- 0.059 in.)
    		F
    		0.7 +- 1.5 mm (0.028 +- 0.059 in.)