IGNITION SWITCH > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.



2. REMOVE STEERING COLUMN COVER LOWER


    G036625E01

  1. Remove the 3 screws and cover lower.

    HINT:
    Turn the steering wheel to the right and left as necessary to remove the 3 screws and cover lower.



3. DISCONNECT CONNECTOR


    G039728E01

  1. Disconnect the 9 connectors and wire harness clamps from the steering column.



4. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY


    A099992E03

  1. Detach the 2 claws and remove the switch from the steering column bracket upper.