DTC    P2226/A5    Barometric Pressure Circuit

DTC    P2228/A5    Barometric Pressure Circuit Low Input

DTC    P2229/A5    Barometric Pressure Circuit High Input

for Preparation Click here


DESCRIPTION

The ECM uses its built-in atmospheric pressure sensor to detect atmospheric pressure. Following the changes in the atmospheric pressure, the ECM corrects the fuel injection volume, timing and duration, and adjusts the common rail internal fuel pressure in order to optimize engine combustion.

DTC No.
DTC Detection Condition
Trouble Area
P2226/A5
P2228/A5
P2229/A5
Atmospheric pressure sensor malfunction
(1 trip detection logic)
ECM

INSPECTION PROCEDURE

HINT:
Read freeze frame data using the intelligent tester. Freeze frame data records the engine conditions when a malfunction is detected. When troubleshooting, freeze frame data can help determine if the vehicle was running or stopped, if the engine was warmed up or not, and other data from the time the malfunction occurred.

NOTICE:
If the ECM is replaced, the new ECM needs initialization (Click here).

1.CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P2226/A5 OR P2228/A5 OR P2229/A5)

Result:

Display (DTC output)
Proceed to
P2226/A5 or P2228/A5 or P2229/A5
A
P2226/A5 or P2228/A5 or P2229/A5 and other DTCs
B



B
GO TO RELEVANT DTC CHART
A

REPLACE ECM