DTC    P0606    ECM / PCM Processor

DTC    P0607/89    Control Module Performance

DTC    P1611/17    Run Pulse Malfunction

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
P0606
P0607/89
P1611/17
ECM internal error
(1 trip detection logic)
  1. ECM

INSPECTION PROCEDURE

HINT:
Read freeze frame data using the intelligent tester. Freeze frame data record the engine condition when a malfunction is detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.

NOTICE:
If the ECM is replacing, the new ECM needs initialization (Click here).

1.CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0606 OR P0607/89 OR P1611/17)

Result:

Display (DTC output)
Proceed to
P0606 or P0607/89 or P1611/17
A
P0606 or P0607/89 or P1611/17 and other DTCs
B



B
GO TO RELEVANT DTC CHART
A

REPLACE ECM