BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL BLOWER W/FAN MOTOR SUB-ASSEMBLY


    E111011

  1. Install the blower motor with the 3 screws.



2. INSTALL BLOWER RESISTOR


    E111010

  1. Install the blower resistor with the 2 screws.



3. INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


    I045586E01

  1. Attach the 3 claws to install the cable.



4. INSTALL NO. 3 AIR DUCT


    I045589E01

  1. Attach the 4 claws to install the duct.