BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 3 AIR DUCT


    I045589E01

  1. Detach the 4 claws and remove the duct.



2. REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


I045586E01

  1. Detach the 3 claws and remove the cable.



3. REMOVE BLOWER RESISTOR


E111010

  1. Remove the 2 screws and blower resistor.



4. REMOVE BLOWER W/FAN MOTOR SUB-ASSEMBLY


E111011

  1. Remove the 3 screws and blower motor.