AIR CONDITIONING AND BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    I043244E01

  1. Install the blower motor with the 3 screws.



2. INSTALL BLOWER RESISTOR


    I043243E01

  1. Install the blower resistor with the 2 screws.



3. INSTALL MODE CONTROL CABLE SUB-ASSEMBLY


    I043955E01

  1. Attach the 3 claws and install the cable.



4. INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


    I043954E01

  1. Attach the 3 claws and install the cable.



5. INSTALL NO. 3 AIR DUCT


    E111004E01

  1. Attach the 4 claws and install the duct.