AIR CONDITIONING AND BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 3 AIR DUCT


    E111004E01

  1. Detach the 4 claws and remove the duct.



2. REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


    I043954E01

  1. Detach the 3 claws and remove the cable.



3. REMOVE MODE CONTROL CABLE SUB-ASSEMBLY


    I043955E01

  1. Detach the 3 claws and remove the cable.



4. REMOVE BLOWER RESISTOR


    I043243E01

  1. Remove the 2 screws and blower resistor.



5. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    I043244E01

  1. Remove the 3 screws and blower motor.