BLOWER RESISTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT BLOWER RESISTOR


E032877E01

  1. Measure the resistance of the blower resistor.

    Standard resistance:
    Tester Connection
    		Specified Condition
    1 - 2
    		1.45 to 1.67 Ω
    1 - 3
    		0.52 to 0.60 Ω
    1 - 4
    		3.12 to 3.60 Ω

    If the result is not as specified, replace the blower resistor.