AUDIO AND VISUAL SYSTEM > Poor Sound Quality in All Modes (Low Volume)

for Preparation Click here


INSPECTION PROCEDURE

1.ADJUST SOUND QUALITY

  1. Operate the radio receiver to adjust the sound quality.

    OK:
    Sound quality returns to normal.



OK
SYSTEM IS OK (BAD SOUND QUALITY)
NG


2.COMPARE VEHICLE WITH ANOTHER VEHICLE OF SAME MODEL

  1. Compare the vehicle with another vehicle that has a normally functioning audio system. Check if there is any difference in the problem.

    OK:
    No difference is found.



OK
SYSTEM IS OK (BAD SOUND QUALITY)
NG

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE