FRONT SEAT OUTER BELT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT OUTER BELT ASSY LH


B081493

NOTICE:
Do not disassemble the retractor.

  1. Before installing the seat belt, check the ELR.

    1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks. If the operation is not as specified, replace the seat belt assembly.
      If the result is not as specified, replace the outer belt assembly.