RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


    B112965

  1. w/ Stereo opening cover:
    Install the No. 1 radio bracket.

    1. Install the 4 screws and radio bracket to the radio receiver.



    B112966

  1. w/Stereo opening cover:
    Install the No. 2 radio bracket.

    1. Install the 4 screws and radio bracket to the radio receiver.



    B085607

  1. w/o Stereo opening cover:
    Install the No. 1 radio bracket.

    1. Install the 4 screws and radio bracket to the radio receiver.



    B085608

  1. w/o Stereo opening cover:
    Install No. 2 radio bracket.

    1. Install the 4 screws and radio bracket to the radio receiver.

  1. Connect all connectors and install the radio receiver.

  1. Install the radio receiver with the 4 screws.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER


B113049E01

  1. Connect all connectors.

  1. Attach the 6 claws and 4 clips to install the panel.

  1. Install the panel with the screw <C>.



3. INSTALL FRE/REC CONTROL KNOB


B111103E02

  1. Install the control knob.



4. INSTALL HEATER CONTROL KNOB


B088680E02

  1. Install the 3 control knobs.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


6. PERFORM INITIALIZATION

  1. Perform initialization (Click here ).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.