REAR SPEED SENSOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT REAR SPEED SENSOR


F050133E02

  1. Measure the resistance of the sensor.

    Standard resistance:
    Tester Connection
    		Specified Condition
    1 (RL-) - 2 (RL+)
    		0.6 to 1.8 kΩ
    1 (RL-) - Body ground
    		10 kΩ or higher
    2 (RL+) - Body ground
    		10 kΩ or higher

    1. If the result is not as specified, replace the speed sensor.

    HINT:
    Check the speed sensor signal after the speed sensor replacement.