REAR LEAF SPRING (for 4WD) > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR LEAF SPRING SHACKLE LOWER BUSH

  1. Using a screwdriver, remove the 2 bushes from the spring shackle side or spring side.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE REAR LEAF SPRING SHACKLE UPPER BUSH

  1. Using a screwdriver, remove the 2 bushes from the spring shackle side or spring side.

    HINT:
    Tape the screwdriver tip before use.