TRANSFER ADAPTOR OIL SEAL > INSTALLATION

for Preparation Click here



1. INSTALL TRANSFER ADAPTER OIL SEAL


G034232E01

  1. Coat the lip of a new oil seal with MP grease.

  1. Using SST and a hammer, tap in the oil seal.

    SST
    09223-00010  

    Oil seal depth:
    45.9 +- 0.5 mm (1.807 +- 0.020 in.)

    NOTICE:
    Be careful not to damage the lip of the oil seal.



2. INSTALL TRANSFER ASSEMBLY

  1. Install the transfer assembly (Click here).



3. INSTALL MANUAL TRANSMISSION UNIT ASSEMBLY

  1. Install the manual transmission unit assembly (Click here).