ROOM LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 ROOM LIGHT BULB

  1. Install the bulb to the room light



2. INSTALL NO. 1 ROOM LIGHT ASSEMBLY


B085593

  1. Connect the light connector.

  1. Install the room light with the 2 screws.



3. INSTALL NO. 1 ROOM LIGHT LENS


B085012E01

  1. Attach the lens with the 4 claws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


5. PERFORM INITIALIZATION

  1. Perform initialization (Click here ).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.