HIGH MOUNTED STOP LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE TAIL GATE SERVICE HOLE COVER


B089565E01

  1. Using a T30 "torx" socket, remove the 10 screws and cover.



3. REMOVE CENTER STOP LIGHT ASSEMBLY


B085010E01

  1. Disconnect the connector.

  1. Detach the 4 claws and remove the light.