HIGH MOUNTED STOP LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL CENTER STOP LIGHT ASSEMBLY


B085010E01

  1. Attach the center stop light with the 4 claws.

  1. Connect the connector.



2. INSTALL TAIL GATE SERVICE HOLE COVER


B089565E02

  1. Using a T30 "torx" socket, install the 10 screws and cover.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION

  1. Perform initialization (Click here ).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.