MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL > INSTALLATION

for Preparation Click here



1. INSTALL MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL

  1. Coast the lip of a new oil seal with MP grease.

  1. Using SST and a hammer, tap in the oil seal.

    SST
    09223-00010  

    Oil seal depth:
    0 +- 0.5 mm (0 +- 0.020 in.)

    NOTICE:
    Be careful not to damage the lip of the oil seal.



2. INSTALL MANUAL TRANSMISSION UNIT ASSEMBLY

  1. Install the manual transmission unit assembly (Click here).