FRONT SUSPENSION LOWER ARM (for 4WD) > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT NO. 1 LOWER ARM BUSH


F050010E01

  1. Using a hammer and chisel, strike and bend the entire flange of the bush as shown in the illustration.



    F050011E01

  1. Using SST and a press, press out the bush.

    SST
    09632-36010  
    09950-00020  
    09950-60010   (09951-00520)



2. REMOVE FRONT NO. 2 LOWER ARM BUSH


F050010E01

  1. Using a hammer and chisel, strike and bend the entire flange of the bush as shown in the illustration.



    F050012E01

  1. Using SST and a press, press out the bush.

    SST
    09632-36010  
    09950-00020  
    09950-60010   (09951-00400)