CLUTCH PEDAL (for LHD) > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT CLUSTER FINISH PANEL


B111106E01

  1. Remove the clip.

  1. Detach the 2 claws and remove the panel.



2. REMOVE COMBINATION METER ASSEMBLY


B087852E01

NOTICE:
There are 2 types of combination meters. One type has a 40 pin connector and 16 pin connector. The other type only has a 40 pin connector.

  1. Remove the 3 screws <B>.

  1. Disconnect all connectors and remove the combination meter.



3. REMOVE CLUTCH PEDAL RETURN SPRING


C113186

  1. w/o Turn over:
    Remove the spring.

  1. Remove the clip and pin.



4. REMOVE CLUTCH PEDAL ASSEMBLY


G037529

  1. Remove the bolt, 2 nuts and clutch pedal.