CLUTCH PEDAL (for LHD) > INSTALLATION

for Preparation Click here



1. INSTALL CLUTCH PEDAL ASSEMBLY


G037529E01

  1. Install the clutch pedal.

  1. Install the bolt and 2 nuts.

    Torque:
    14 N*m{ 143 kgf*cm , 10 ft.*lbf } for nut A
    24 N*m{ 245 kgf*cm , 18 ft.*lbf } for bolt B



2. INSTALL CLUTCH PEDAL RETURN SPRING


C113186

  1. Install the pin and new clip.

  1. w/o Turn over:
    Install the spring.



3. INSTALL COMBINATION METER ASSEMBLY


B087852E02

NOTICE:
There are 2 types of combination meters. One type has a 40 pin connector and 16 pin connector. The other type only has a 40 pin connector.

  1. Connect all connectors.

  1. Install the combination meter with the 3 screws <B>.



4. INSTALL INSTRUMENT CLUSTER FINISH PANEL


B111106E02

  1. Attach the 2 claws to install the panel.

  1. Install the clip.



5. CHECK FLUID LEVEL IN RESERVOIR

  1. Check fluid level in reservoir (Click here).