FLOOR SHIFT ASSEMBLY > REASSEMBLY

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY


G037863E01

  1. Install the ECU with the 2 screws.



2. INSTALL SHIFT LEVER SUB-ASSEMBLY


G037862E01

  1. Install the shift lever.

  1. Install the pin. Then move the clip downward to lock the pin in place.



3. INSTALL SHIFT LOCK RELEASE BUTTON


C112835E01

  1. Install the spring and shift lock release button.

    HINT:
    Securely attach the claws.



4. INSTALL SHIFT LEVER SHAFT HOUSING ASSEMBLY


G037860E01

  1. Install the shaft housing with the shift lever guide pin and a new shift lever nut.

    HINT:
    Securely attach the nut.



5. INSTALL POSITION INDICATOR HOUSING LOWER


G037859E01

HINT:
Securely attach the claw.



6. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY


G037858E01

  1. Install the bulb to the position indicator housing.

  1. Install the indicator light wire.

    HINT:
    Securely attach the 3 clamps.



7. INSTALL POSITION INDICATOR SLIDE COVER


8. INSTALL POSITION INDICATOR HOUSING UPPER


G037857E01

  1. Install the position indicator housing to the shift lever shaft housing.

    HINT:
    Securely attach the claws.



9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


G037856E02

  1. Install the knob and twist it clockwise to lock it in place.