FLOOR SHIFT ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY


3. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY
Remove the parking brake hole cover sub-assembly (Click here).


4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
Remove the upper console panel sub-assembly (Click here).


5. REMOVE CONSOLE BOX ASSEMBLY
Remove the console box assembly (Click here).


6. REMOVE FLOOR SHIFT ASSEMBLY


G037854E01

  1. Disconnect the 2 connectors and clamp.

  1. Move the shift lever to L.

  1. Disconnect the transmission control cable.



    G037855E01

  1. Remove the 4 bolts.

  1. Remove the floor shift.