PARK / NEUTRAL POSITION SWITCH > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR


3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


G034253E01

  1. Using a screwdriver, pry out the lock washer.

  1. Remove the lock nut and lock washer.

  1. Remove the bolt and park/neutral position switch.