PARK / NEUTRAL POSITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH


G026080E06

  1. Measure the resistance of the PNP switch when the shift lever is moved to each position.

    Standard resistance:
    Tester Connection
    		Shift Lever Position
    		Specified Condition
    4 (B) - 5 (L)
    		P or N
    		Below 1 Ω
    4 (B) - 5 (L)
    		Not on P or N
    		10 kΩ or higher
    1 (RL) - 2 (RB)
    		R
    		Below 1 Ω
    1 (RL) - 2 (RB)
    		Not on R
    		10 kΩ or higher
    2 (RB) - 7 (DL)
    		D
    		Below 1 Ω
    2 (RB) - 7 (DL)
    		Not on D
    		10 kΩ or higher
    2 (RB) - 3 (2L)
    		2
    		Below 1 Ω
    2 (RB) - 3 (2L)
    		Not on 2
    		10 kΩ or higher
    2 (RB) - 8 (LL)
    		L
    		Below 1 Ω
    2 (RB) - 8 (LL)
    		Not on L
    		10 kΩ or higher