FRONT WHEEL ALIGNMENT > ADJUSTMENT

for Preparation Click here



1. INSPECT TIRE
Inspect the tires (Click here).


2. INSPECT VEHICLE HEIGHT

NOTICE:
Before inspecting the wheel alignment, adjust the vehicle height to the specification.



    F050090E01
    F050091E01

  1. Press down on the vehicle several times to stabilize the suspension, and measure the vehicle height.

    Vehicle height (unloaded vehicle):
    2WD:
    Vehicle Model
    		Front A - B
    		Rear C - D
    GGN15R-TRMDKQ
    		81 mm (3.19 in.)
    		48 mm (1.89 in.)
    GGN15R-TRMDKQ3
    		81 mm (3.19 in.)
    		48 mm (1.89 in.)
    GGN15R-TRADKQ
    		85 mm (3.35 in.)
    		50 mm (1.97 in.)
    GGN15R-TRADKQ3
    		84 mm (3.31 in.)
    		49 mm (1.93 in.)
    TGN16R-TRMDKQ3
    		84 mm (3.31 in.)
    		48 mm (1.89 in.)
    KUN16R-TRMDYQ3
    		88 mm (3.46 in.)
    		50 mm (1.97 in.)
    GGN15R-CRADKQ
    		91 mm (3.58 in.)
    		50 mm (1.97 in.)
    GGN15R-CRASKQ
    		90 mm (3.54 in.)
    		51 mm (2.01 in.)
    GGN15R-PRMDKQ
    		78 mm (3.07 in.)
    		52 mm (2.05 in.)
    GGN15R-PRMSKQ
    		79 mm (3.11 in.)
    		53 mm (2.09 in.)
    GGN15R-PRADKQ
    		82 mm (3.23 in.)
    		54 mm (2.13 in.)
    GGN15R-PRASKQ
    		82 mm (3.23 in.)
    		54 mm (2.13 in.)
    TGN16R-PRMDKQ
    		80 mm (3.15 in.)
    		52 mm (2.05 in.)
    KUN16R-PRMDYQ
    		79 mm (3.11 in.)
    		54 mm (2.13 in.)
    TGN15L-TRMDK
    		81 mm (3.19 in.)
    		47 mm (1.85 in.)
    TGN16L-TRMDK
    		(Tire size 195R14C)
    		84 mm (3.31 in.)
    		48 mm (1.89 in.)
    (Tire size 205/70R15C)
    		84 mm (3.31 in.)
    		49 mm (1.93 in.)
    TGN16L-CRMDK
    		90 mm (3.54 in.)
    		51 mm (2.01 in.)
    TGN15L-PRMDK
    		82 mm (3.23 in.)
    		52 mm (2.05 in.)
    TGN16L-PRMDK
    		(Tire size 195R14C)
    		84 mm (3.31 in.)
    		52 mm (2.05 in.)
    (Tire size 205/70R15C)
    		84 mm (3.31 in.)
    		53 mm (2.09 in.)
    KUN15R/L-TRMDY
    		82 mm (3.23 in.)
    		48 mm (1.89 in.)
    KUN15R/L-PRMDY
    		81 mm (3.19 in.)
    		53 mm (2.09 in.)

    Vehicle height (unloaded vehicle):
    4WD:
    Vehicle Model
    		Front A - B
    		Rear C - D
    KUN26R-TRMDYQ3
    		62 mm (2.44 in.)
    		-86 mm (-3.39 in.)
    KUN26R-TRPDYQ3
    		65 mm (2.56 in.)
    		-85 mm (-3.35 in.)
    GGN25R-TRMDKQ3
    		60 mm (2.36 in.)
    		-87 mm (-3.43 in.)
    GGN25R-TRADKQ3
    		64 mm (2.52 in.)
    		-86 mm (-3.39 in.)
    KUN26R-CRMDYQ3
    		62 mm (2.44 in.)
    		-83 mm (-3.27 in.)
    KUN26R-CRMSYQ
    		62 mm (2.44 in.)
    		-82 mm (-3.23 in.)
    GGN25R-CRMSKQ
    		61 mm (2.40 in.)
    		-83 mm (-3.27 in.)
    KUN26R-PRMDYQ
    		65 mm (2.56 in.)
    		-80 mm (-3.15 in.)
    KUN26R-PRMDYQ3
    		65 mm (2.56 in.)
    		-81 mm (-3.19 in.)
    KUN26R-PRMSYQ
    		66 mm (2.60 in.)
    		-80 mm (-3.15 in.)
    KUN26R-PRPDYQ
    		68 mm (2.60 in.)
    		-79 mm (-3.11 in.)
    KUN26R-PRPSYQ
    		68 mm (2.60 in.)
    		-79 mm (-3.11 in.)
    GGN25R-PRMDKQ
    		65 mm (2.56 in.)
    		-81 mm (-3.19 in.)
    GGN25R-PRMSKQ
    		65 mm (2.56 in.)
    		-81 mm (-3.19 in.)
    GGN25R-PRADKQ
    		68 mm (2.60 in.)
    		-80 mm (-3.15 in.)
    GGN25R-PRASKQ
    		69 mm (2.72 in.)
    		-80 mm (-3.15 in.)
    KUN25R-TRMDH
    		(Tire size 205R16C)
    		63 mm (2.48 in.)
    		-86 mm (-3.39 in.)
    (Tire size 255/70R15C)
    		63 mm (2.48 in.)
    		-85 mm (-3.35 in.)
    KUN25R/L-PRMDH
    		67 mm (2.64 in.)
    		-81 mm (-3.19 in.)
    TGN26L-PRMDK
    		68 mm (2.60 in.)
    		-81 mm (-3.19 in.)

    Measuring point:
    A:
    Ground clearance of front wheel center
    B:
    Ground clearance of lower suspension arm No. 2 set bolt center
    C:
    Ground clearance of rear wheel center
    D:
    Ground clearance of strut rod set bolt center

    1. If the vehicle height is not as specified, adjust the height by pressing down on the vehicle several times to stabilize the suspension.



3. INSPECT TOE-IN


SA03213E04

Toe-in (unloaded vehicle):
2WD:
Vehicle Model
Front A + B
Rear C - D
GGN15R-TRMDKQ
GGN15R-TRMDKQ3

A + B: 0°07' +- 5' (0.12°+- 0.09°)
C - D: 2.6 +- 1.0 mm (0.10 +- 0.04 in.)
GGN15R-TRADKQ
A + B: 0°06' +- 5' (0.10°+- 0.09°)
C - D: 2.3 +- 1.0 mm (0.09 +- 0.04 in.)
GGN15R-TRADKQ3
A + B: 0°07' +- 5' (0.11°+- 0.09°)
C - D: 2.3 +- 1.0 mm (0.09 +- 0.04 in.)
TGN16R-TRMDKQ3
A + B: 0°07' +- 5' (0.11°+- 0.09°)
C - D: 2.4 +- 1.0 mm (0.09 +- 0.04 in.)
KUN16R-TRMDYQ3
A + B: 0°05' +- 5' (0.09°+- 0.09°)
C - D: 2.0 +- 1.0 mm (0.08 +- 0.04 in.)
GGN15R-CRADKQ
A + B: 0°05' +- 5' (0.08°+- 0.09°)
C - D: 1.7 +- 1.0 mm (0.07 +- 0.04 in.)
GGN15R-CRASKQ
A + B: 0°05' +- 5' (0.08°+- 0.09°)
C - D: 1.8 +- 1.0 mm (0.07 +- 0.04 in.)
GGN15R-PRMDKQ
A + B: 0°05' +- 5' (0.09°+- 0.09°)
C - D: 1.9 +- 1.0 mm (0.07 +- 0.04 in.)
GGN15R-PRMSKQ
A + B: 0°05' +- 5' (0.08°+- 0.09°)
C - D: 1.9 +- 1.0 mm (0.07 +- 0.04 in.)
GGN15R-PRADKQ
A + B: 0°04' +- 5' (0.07°+- 0.09°)
C - D: 1.6 +- 1.0 mm (0.06 +- 0.04 in.)
GGN15R-PRASKQ
A + B: 0°04' +- 5' (0.07°+- 0.09°)
C - D: 1.5 +- 1.0 mm (0.06 +- 0.04 in.)
TGN16R-PRMDKQ
(Tire size 195R14C)
A + B: 0°05' +- 5' (0.08°+- 0.09°)
C - D: 1.7 +- 1.0 mm (0.07 +- 0.04 in.)
(Tire size 205/70R15C)
A + B: 0°05' +- 5' (0.08°+- 0.09°)
C - D: 1.8 +- 1.0 mm (0.07 +- 0.04 in.)
KUN16R-PRMDYQ
A + B: 0°05' +- 5' (0.09°+- 0.09°)
C - D: 1.9 +- 1.0 mm (0.07 +- 0.04 in.)
TGN15L-TRMDK
A + B: 0°05' +- 5' (0.12°+- 0.09°)
C - D: 2.6 +- 1.0 mm (0.10 +- 0.04 in.)
TGN16L-TRMDK
A + B: 0°07' +- 5' (0.11°+- 0.09°)
C - D: 2.4 +- 1.0 mm (0.09 +- 0.04 in.)
TGN16L-CRMDK
A + B: 0°05' +- 5' (0.08°+- 0.09°)
C - D: 1.8 +- 1.0 mm (0.07 +- 0.04 in.)
TGN15L-PRMDK
(Tire size 195R14C)
A + B: 0°04' +- 5' (0.07°+- 0.09°)
C - D: 1.5 +- 1.0 mm (0.06 +- 0.04 in.)
(Tire size 205/70R15C)
A + B: 0°04' +- 5' (0.07°+- 0.09°)
C - D: 1.6 +- 1.0 mm (0.06 +- 0.04 in.)
TGN16L-PRMDK
A + B: 0°04' +- 5' (0.06°+- 0.09°)
C - D: 1.4 +- 1.0 mm (0.06 +- 0.04 in.)
KUN15R/L-TRMDY
A + B: 0°07' +- 5' (0.11°+- 0.09°)
C - D: 2.5 +- 1.0 mm (0.10 +- 0.04 in.)
KUN15R/L-PRMDY
A + B: 0°05' +- 5' (0.08°+- 0.09°)
C - D: 1.7 +- 1.0 mm (0.07 +- 0.04 in.)
4WD:
Vehicle Model
Front A + B
Rear C - D
KUN26R-TRMDYQ3
A + B: 0°09' +- 5' (0.15°+- 0.09°)
C - D: 3.7 +- 1.0 mm (0.15 +- 0.04 in.)
KUN26R-TRPDYQ3
A + B: 0°08' +- 5' (0.13°+- 0.09°)
C - D: 3.2 +- 1.0 mm (0.13 +- 0.04 in.)
GGN25R-TRMDKQ3
A + B: 0°10' +- 5' (0.17°+- 0.09°)
C - D: 4.0 +- 1.0 mm (0.16 +- 0.04 in.)
GGN25R-TRADKQ3
A + B: 0°08' +- 5' (0.14°+- 0.09°)
C - D: 3.4 +- 1.0 mm (0.13 +- 0.04 in.)
KUN26R-CRMDYQ3
A + B: 0°09' +- 5' (0.15°+- 0.09°)
C - D: 3.6 +- 1.0 mm (0.14 +- 0.04 in.)
KUN26R-CRMSYQ
A + B: 0°08' +- 5' (0.14°+- 0.09°)
C - D: 3.5 +- 1.0 mm (0.14 +- 0.04 in.)
GGN25R-CRMSKQ
A + B: 0°09' +- 5' (0.15°+- 0.09°)
C - D: 3.7 +- 1.0 mm (0.15 +- 0.04 in.)
KUN26R-PRMDYQ
KUN26R-PRMDYQ3
A + B: 0°07' +- 5' (0.12°+- 0.09°)
C - D: 3.0 +- 1.0 mm (0.12 +- 0.04 in.)
KUN26R-PRMSYQ
A + B: 0°07' +- 5' (0.12°+- 0.09°)
C - D: 2.9 +- 1.0 mm (0.11 +- 0.04 in.)
KUN26R-PRPDYQ
KUN26R-PRPSYQ
A + B: 0°06' +- 5' (0.10°+- 0.09°)
C - D: 2.5 +- 1.0 mm (0.10 +- 0.04 in.)
GGN25R-PRMDKQ
GGN25R-PRMSKQ
A + B: 0°08' +- 5' (0.13°+- 0.09°)
C - D: 3.1 +- 1.0 mm (0.12 +- 0.04 in.)
GGN25R-PRADKQ
A + B: 0°06' +- 5' (0.10°+- 0.09°)
C - D: 2.5 +- 1.0 mm (0.10 +- 0.04 in.)
GGN25R-PRASKQ
A + B: 0°06' +- 5' (0.10°+- 0.09°)
C - D: 2.4 +- 1.0 mm (0.09 +- 0.04 in.)
KUN25R-TRMDH
A + B: 0°09' +- 5' (0.15°+- 0.09°)
C - D: 3.5 +- 1.0 mm (0.14 +- 0.04 in.)
KUN25R/L-PRMDH
A + B: 0°07' +- 5' (0.11°+- 0.09°)
C - D: 2.8 +- 1.0 mm (0.11 +- 0.04 in.)
TGN26L-PRMDK
A + B: 0°07' +- 5' (0.11°+- 0.09°)
C - D: 2.6 +- 1.0 mm (0.10 +- 0.04 in.)

  1. If the toe-in is not as specified, adjust it at the rack ends.


4. ADJUST TOE-IN

  1. Release the rack boot set clips.

  1. Loosen the tie rod end lock nuts.

  1. Turn the right and left rack ends by an equal amount to adjust the toe-in to the center value.



    F050750E01

  1. Make sure that the length of the right and left rack ends are approximately the same.

    Standard difference:
    0 +- 1 mm (0 +- 0.039 in.)

  1. Tighten the tie rod end lock nuts.

    Torque:
    55.5 N*m{ 566 kgf*cm , 41 ft.*lbf }

  1. Place the boots on the seats and install the clips.

    HINT:
    Make sure that the boots are not twisted.



5. INSPECT WHEEL ANGLE


SA00028E06

  1. Turn the steering wheel to the left and right full lock positions, and measure the turning angle.

    Wheel angle (unloaded vehicle):
    2WD (Single cab):
    Inside wheel angle
    		Outside wheel angle (reference)
    39°36' (37°36' to 40°36')
    (39.6°(37.6° to 40.6°))
    		33°18'
    (33.3°)
    2WD (Extra, double cab):
    Inside wheel angle
    		Outside wheel angle (reference)
    39°48' (37°48' to 40°48')
    (39.8°(37.8° to 40.8°))
    		33°30'
    (33.5°)
    4WD:
    Inside wheel angle
    		Outside wheel angle (reference)
    36°30' (34°30' to 37°30')
    (36.5°(34.5° to 37.5°))
    		33°30'
    (33.5°)

    1. If the angles are not as specified, check and adjust the right and left rack end lengths.



6. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION


Z003382E06

  1. Install the camber-caster-kingpin gauge or place the front wheels on the center of the wheel alignment tester.

  1. Inspect the camber, caster and steering axis inclination.

    Camber inclination (unloaded vehicle):
    2WD:
    Vehicle Model
    		Camber Inclination
    GGN15R-TRMDKQ
    Right-left error
    		0°09' +- 30' (0.15°+- 0.50°)
    30' (0.50°) or less
    GGN15R-TRMDKQ3
    Right-left error
    		0°09' +- 30' (0.15°+- 0.50°)
    30' (0.50°) or less
    GGN15R-TRADKQ
    Right-left error
    		0°05' +- 30' (0.08°+- 0.50°)
    30' (0.50°) or less
    GGN15R-TRADKQ3
    Right-left error
    		0°05' +- 30' (0.08°+- 0.50°)
    30' (0.50°) or less
    TGN16R-TRMDKQ3
    Right-left error
    		0°06' +- 30' (0.10°+- 0.50°)
    30' (0.50°) or less
    KUN16R-TRMDYQ3
    Right-left error
    		0°10' +- 30' (0.17°+- 0.50°)
    30' (0.50°) or less
    GGN15R-CRADKQ
    GGN15R-CRASKQ
    Right-left error
    		-0°02' +- 30' (-0.O3°+- 0.50°)
    30' (0.50°) or less
    GGN15R-PRMDKQ
    Right-left error
    		0°12' +- 30' (0.20°+- 0.50°)
    30' (0.50°) or less
    GGN15R-PRMSKQ
    Right-left error
    		0°11' +- 30' (0.18°+- 0.50°)
    30' (0.50°) or less
    GGN15R-PRADKQ
    Right-left error
    		0°08' +- 30' (0.13°+- 0.50°)
    30' (0.50°) or less
    GGN15R-PRASKQ
    Right-left error
    		0°07' +- 30' (0.12°+- 0.50°)
    30' (0.50°) or less
    TGN16R-PRMDKQ
    Right-left error
    		0°10' +- 30' (0.17°+- 0.50°)
    30' (0.50°) or less
    KUN16R-PRMDYQ
    Right-left error
    		0°11' +- 30' (0.18°+- 0.50°)
    30' (0.50°) or less
    TGN15L-TRMDK
    Right-left error
    		0°09' +- 30' (0.15°+- 0.50°)
    30' (0.50°) or less
    TGN16L-TRMDK
    Right-left error
    		0°06' +- 30' (0.10°+- 0.50°)
    30' (0.50°) or less
    KUN15R/L-TRMDY
    Right-left error
    		0°08' +- 30' (0.13°+- 0.50°)
    30' (0.50°) or less
    TGN16L-CRMDK
    Right-left error
    		-0°10' +- 30' (-0.17°+- 0.50°)
    30' (0.50°) or less
    TGN15L-PRMDK
    Right-left error
    		0°08' +- 30' (0.13°+- 0.50°)
    30' (0.50°) or less
    TGN16L-PRMDK
    Right-left error
    		0°06' +- 30' (0.10°+- 0.50°)
    30' (0.50°) or less
    KUN15R/L-PRMDY
    Right-left error
    		0°09' +- 30' (0.15°+- 0.50°)
    30' (0.50°) or less
    4WD:
    Vehicle Model
    		Camber Inclination
    KUN26R-TRMDYQ3
    Right-left error
    		0°32' +- 30' (0.60°+- 0.50°)
    30' (0.50°) or less
    KUN26R-TRPDYQ3
    Right-left error
    		0°29' +- 30' (0.48°+- 0.50°)
    30' (0.50°) or less
    GGN25R-TRMDKQ3
    Right-left error
    		0°34' +- 30' (0.57°+- 0.50°)
    30' (0.50°) or less
    GGN25R-TRADKQ3
    Right-left error
    		0°30' +- 30' (0.50°+- 0.50°)
    30' (0.50°) or less
    KUN26R-CRMDYQ3
    Right-left error
    		0°31' +- 30' (0.52°+- 0.50°)
    30' (0.50°) or less
    KUN26R-CRMSYQ
    Right-left error
    		0°31' +- 30' (0.52°+- 0.50°)
    30' (0.50°) or less
    GGN25R-CRMSKQ
    Right-left error
    		0°32' +- 30' (0.60°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRMDYQ
    Right-left error
    		0°28' +- 30' (0.47°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRMDYQ3
    Right-left error
    		0°28' +- 30' (0.47°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRMSYQ
    Right-left error
    		0°28' +- 30' (0.47°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRPDYQ
    Right-left error
    		0°25' +- 30' (0.42°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRPSYQ
    Right-left error
    		0°25' +- 30' (0.42°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRMDKQ
    Right-left error
    		0°29' +- 30' (0.48°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRMSKQ
    Right-left error
    		0°29' +- 30' (0.48°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRADKQ
    Right-left error
    		0°25' +- 30' (0.42°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRASKQ
    Right-left error
    		0°24' +- 30' (0.40°+- 0.50°)
    30' (0.50°) or less
    KUN25R-TRMDH
    Right-left error
    		0°31' +- 30' (0.52°+- 0.50°)
    30' (0.50°) or less
    KUN25R/L-PRMDH
    Right-left error
    		0°27' +- 30' (0.45°+- 0.50°)
    30' (0.50°) or less
    TGN26L-PRMDK
    Right-left error
    		0°25' +- 30' (0.42°+- 0.50°)
    30' (0.50°) or less


    Caster inclination (unloaded vehicle):
    2WD:
    Vehicle Model
    		Caster Inclination
    GGN15R-TRMDKQ
    Right-left error
    		3°04' +- 30' (3.07°+- 0.50°)
    30' (0.50°) or less
    GGN15R-TRMDKQ3
    Right-left error
    		3°03' +- 30' (3.05°+- 0.50°)
    30' (0.50°) or less
    GGN15R-TRADKQ
    Right-left error
    		3°06' +- 30' (3.10°+- 0.50°)
    30' (0.50°) or less
    GGN15R-TRADKQ3
    Right-left error
    		3°05' +- 30' (3.08°+- 0.50°)
    30' (0.50°) or less
    TGN16R-TRMDKQ3
    Right-left error
    		Tire size 195R14C
    		3°06' +- 30' (3.10°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°05' +- 30' (3.08°+- 0.50°)
    30' (0.50°) or less
    KUN16R-TRMDYQ3
    Right-left error
    		Tire size 195R14C
    		3°07' +- 30' (3.12°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°06' +- 30' (3.10°+- 0.50°)
    30' (0.50°) or less
    GGN15R-CRADKQ
    Right-left error
    		3°12' +- 30' (3.20°+- 0.50°)
    30' (0.50°) or less
    GGN15R-CRASKQ
    Right-left error
    		3°13' +- 30' (3.22°+- 0.50°)
    30' (0.50°) or less
    GGN15R-PRMDKQ
    GGN15R-PRMSKQ
    Right-left error
    		3°13' +- 30' (3.22°+- 0.50°)
    30' (0.50°) or less
    GGN15R-PRADKQ
    GGN15R-PRASKQ
    Right-left error
    		3°15' +- 30' (3.25°+- 0.50°)
    30' (0.50°) or less
    TGN16R-PRMDKQ
    Right-left error
    		Tire size 195R14C
    		3°15' +- 30' (3.25°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°13' +- 30' (3.22°+- 0.50°)
    30' (0.50°) or less
    KUN16R-PRMDYQ
    Right-left error
    		Tire size 195R14C
    		3°14' +- 30' (3.23°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°13' +- 30' (3.22°+- 0.50°)
    30' (0.50°) or less
    TGN15L-TRMDK
    Right-left error
    		Tire size 195R14C
    		3°05' +- 30' (3.08°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°04' +- 30' (3.07°+- 0.50°)
    30' (0.50°) or less
    TGN16L-TRMDK
    Right-left error
    		Tire size 195R14C
    		3°06' +- 30' (3.10°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°05' +- 30' (3.08°+- 0.50°)
    30' (0.50°) or less
    KUN15R/L-TRMDY
    Right-left error
    		Tire size 195R14C
    		3°04' +- 30' (3.07°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°03' +- 30' (3.05°+- 0.50°)
    30' (0.50°) or less
    TGN16L-CRMDK
    Right-left error
    		Tire size 195R14C
    		3°15' +- 30' (3.25°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°14' +- 30' (3.23°+- 0.50°)
    30' (0.50°) or less
    TGN15L-PRMDK
    Right-left error
    		Tire size 195R14C
    		3°14' +- 30' (3.23°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°13' +- 30' (3.22°+- 0.50°)
    30' (0.50°) or less
    TGN16L-PRMDK
    Right-left error
    		Tire size 195R14C
    		3°15' +- 30' (3.25°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°14' +- 30' (3.23°+- 0.50°)
    30' (0.50°) or less
    KUN15R/L-PRMDY
    Right-left error
    		Tire size 195R14C
    		3°14' +- 30' (3.23°+- 0.50°)
    30' (0.50°) or less
    Tire size 205/70R15C
    		3°12' +- 30' (3.20°+- 0.50°)
    30' (0.50°) or less
    4WD:
    Vehicle Model
    		Caster Inclination
    KUN26R-TRMDYQ3
    Right-left error
    		Tire size 205R16C
    		1°24' +- 30' (1.40°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°23' +- 30' (1.38°+- 0.50°)
    30' (0.50°) or less
    KUN26R-TRPDYQ3
    Right-left error
    		Tire size 205R16C
    		1°27' +- 30' (1.45°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°26' +- 30' (1.43°+- 0.50°)
    30' (0.50°) or less
    GGN25R-TRMDKQ3
    Right-left error
    		Tire size 205R16C
    		1°23' +- 30' (1.38°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°22' +- 30' (1.37°+- 0.50°)
    30' (0.50°) or less
    GGN25R-TRADKQ3
    Right-left error
    		Tire size 205R16C
    		1°27' +- 30' (1.45°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°26' +- 30' (1.43°+- 0.50°)
    30' (0.50°) or less
    KUN26R-CRMDYQ3
    Right-left error
    		Tire size 205R16C
    		1°30' +- 30' (1.50°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°28' +- 30' (1.47°+- 0.50°)
    30' (0.50°) or less
    KUN26R-CRMSYQ
    GGN25R-CRMSKQ
    Right-left error
    		1°29' +- 30' (1.48°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRMDYQ
    Right-left error
    		Tire size 205R16C
    		1°36' +- 30' (1.60°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°35' +- 30' (1.58°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRMDYQ3
    Right-left error
    		Tire size 205R16C
    		1°35' +- 30' (1.58°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°34' +- 30' (1.57°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRMSYQ
    Right-left error
    		1°35' +- 30' (1.58°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRPDYQ
    Right-left error
    		Tire size 205R16C
    		1°39' +- 30' (1.65°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°38' +- 30' (1.63°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRPSYQ
    Right-left error
    		1°37' +- 30' (1.62°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRMDKQ
    Right-left error
    		Tire size 205R16C
    		1°36' +- 30' (1.60°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°35' +- 30' (1.58°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRMSKQ
    Right-left error
    		1°34' +- 30' (1.57°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRADKQ
    Right-left error
    		Tire size 205R16C
    		1°39' +- 30' (1.65°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°38' +- 30' (1.63°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRASKQ
    Right-left error
    		1°38' +- 30' (1.63°+- 0.50°)
    30' (0.50°) or less
    KUN25R-TRMDH
    Right-left error
    		Tire size 205R16C
    		1°26' +- 30' (1.43°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°25' +- 30' (1.42°+- 0.50°)
    30' (0.50°) or less
    KUN25R/L-PRMDH
    Right-left error
    		Tire size 205R16C
    		1°36' +- 30' (1.60°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°35' +- 30' (1.58°+- 0.50°)
    30' (0.50°) or less
    TGN26L-PRMDK
    Right-left error
    		Tire size 205R16C
    		1°38' +- 30' (1.63°+- 0.50°)
    30' (0.50°) or less
    Tire size 255/70R15C
    		1°37' +- 30' (1.62°+- 0.50°)
    30' (0.50°) or less


    Steering axis inclination (unloaded vehicle):
    2WD:
    Vehicle Model
    		Steering Axis Inclination
    GGN15R-TRMDKQ
    GGN15R-TRMDKQ3
    Right-left error
    		10°45' +- 30' (10.75°+- 0.50°)
    30' (0.50°) or less
    GGN15R-TRADKQ
    GGN15R-TRADKQ3
    Right-left error
    		10°49' +- 30' (10.82°+- 0.50°)
    30' (0.50°) or less
    TGN16R-TRMDKQ3
    Right-left error
    		10°48' +- 30' (10.80°+- 0.50°)
    30' (0.50°) or less
    KUN16R-TRMDYQ3
    Right-left error
    		10°53' +- 30' (10.88°+- 0.50°)
    30' (0.50°) or less
    GGN15R-CRADKQ
    Right-left error
    		10°57' +- 30' (10.95°+- 0.50°)
    30' (0.50°) or less
    GGN15R-CRASKQ
    Right-left error
    		10°56' +- 30' (10.93°+- 0.50°)
    30' (0.50°) or less
    GGN15R-PRMDKQ
    GGN15R-PRMSKQ
    Right-left error
    		10°43' +- 30' (10.72°+- 0.50°)
    30' (0.50°) or less
    GGN15R-PRADKQ
    Right-left error
    		10°46' +- 30' (10.77°+- 0.50°)
    30' (0.50°) or less
    GGN15R-PRASKQ
    Right-left error
    		10°47' +- 30' (10.78°+- 0.50°)
    30' (0.50°) or less
    TGN16R-PRMDKQ
    Right-left error
    		10°44' +- 30' (10.73°+- 0.50°)
    30' (0.50°) or less
    KUN16R-PRMDYQ
    Right-left error
    		10°43' +- 30' (10.72°+- 0.50°)
    30' (0.50°) or less
    TGN15L-TRMDK
    Right-left error
    		10°45' +- 30' (10.75°+- 0.50°)
    30' (0.50°) or less
    TGN16L-TRMDK
    Right-left error
    		10°48' +- 30' (10.80°+- 0.50°)
    30' (0.50°) or less
    KUN15R/L-TRMDY
    Right-left error
    		10°46' +- 30' (10.77°+- 0.50°)
    30' (0.50°) or less
    TGN16L-CRMDK
    Right-left error
    		10°56' +- 30' (10.93°+- 0.50°)
    30' (0.50°) or less
    TGN15L-PRMDK
    Right-left error
    		10°47' +- 30' (10.78°+- 0.50°)
    30' (0.50°) or less
    TGN16L-PRMDK
    Right-left error
    		10°49' +- 30' (10.82°+- 0.50°)
    30' (0.50°) or less
    KUN15R/L-PRMDY
    Right-left error
    		10°45' +- 30' (10.75°+- 0.50°)
    30' (0.50°) or less
    4WD:
    Vehicle Model
    		Steering Axis Inclination
    KUN26R-TRMDYQ3
    Right-left error
    		11°57' +- 30' (11.95°+- 0.50°)
    30' (0.50°) or less
    KUN26R-TRPDYQ3
    Right-left error
    		11°60' +- 30' (12.00°+- 0.50°)
    30' (0.50°) or less
    GGN25R-TRMDKQ3
    Right-left error
    		11°55' +- 30' (11.92°+- 0.50°)
    30' (0.50°) or less
    GGN25R-TRADKQ3
    Right-left error
    		11°58' +- 30' (11.97°+- 0.50°)
    30' (0.50°) or less
    KUN26R-CRMDYQ3
    Right-left error
    		11°57' +- 30' (11.95°+- 0.50°)
    30' (0.50°) or less
    KUN26R-CRMSYQ
    Right-left error
    		11°58' +- 30' (11.97°+- 0.50°)
    30' (0.50°) or less
    GGN25R-CRMSKQ
    Right-left error
    		11°56' +- 30' (11.93°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRMDYQ
    KUN26R-PRMDYQ3
    KUN26R-PRMSYQ
    Right-left error
    		12°01' +- 30' (12.02°+- 0.50°)
    30' (0.50°) or less
    KUN26R-PRPDYQ
    KUN26R-PRPSYQ
    Right-left error
    		12°04' +- 30' (12.07°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRMDKQ
    GGN25R-PRMSKQ
    Right-left error
    		12°00' +- 30' (12.00°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRADKQ
    Right-left error
    		12°04' +- 30' (12.07°+- 0.50°)
    30' (0.50°) or less
    GGN25R-PRASKQ
    Right-left error
    		12°05' +- 30' (12.08°+- 0.50°)
    30' (0.50°) or less
    KUN25R-TRMDH
    Right-left error
    		11°58' +- 30' (11.97°+- 0.50°)
    30' (0.50°) or less
    KUN25R/L-PRMDH
    Right-left error
    		12°02' +- 30' (12.03°+- 0.50°)
    30' (0.50°) or less
    TGN26L-PRMDK
    Right-left error
    		12°03' +- 30' (12.05°+- 0.50°)
    30' (0.50°) or less

    1. If the camber and caster are not as specified, adjust them.
    1. If the steering axis inclination is not as specified after the camber and caster have been correctly adjusted, check the steering knuckle and front wheel for distortion or looseness.



7. ADJUST CAMBER AND CASTER

NOTICE:
After the camber has been adjusted, inspect the toe-in.

  1. Loosen the camber adjusting cam nut and camber adjusting cam bolt.

  1. Turn the No. 1 camber adjusting cam and No. 2 camber adjusting cam in both directions, and adjusting the camber and caster to the center value.



  1. The camber and caster should be as close as possible to the center value.


    F049902E01



    F049980E01



    F049903E01

  1. How to read adjustment chart (using examples).

    1. Measure the present alignment.

      Measured value (reference):
      Camber
      		Caster
      0°20' (0.30°)
      		3°20' (3.30°)

    2. Mark the difference between the standard value (A) and the measured value (B) on the adjustment chart.

      Standard value:

      Camber:
      0°00' (0.00°)

      Caster:
      3°00' (3.00°)

      Formula:
      A - B = C

      Camber:
      0°00' - 0°20' = -0°20'

      Caster:
      3°00' - 3°20' = -0°20'



    3. As shown in the chart, read the distance from the marked point to 0, and adjust the front and/or rear adjusting cams accordingly.

      Camber adjusting cam No. 1:
      + 1.2

      Camber adjusting cam No. 2:
      + 0.3



      F049904E01



      C113155E01