EXTENSION HOUSING OIL SEAL > REMOVAL

for Preparation Click here



1. DRAIN TRANSFER OIL


2. REMOVE LOWER TRANSFER CASE PROTECTOR


F043499

  1. Remove the 4 bolts and protector.



3. REMOVE REAR PROPELLER SHAFT ASSEMBLY

  1. Remove the rear propeller shaft (Click here).



4. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

  1. Remove the companion flange (rear) in the same way as the companion flange (front).

    SST
    09330-00021  
    09950-40011   (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04051, 09957-04010, 09958-04011)



5. REMOVE TRANSFER EXTENSION HOUSING OIL SEAL


F043484E01

  1. Using SST, tap out the oil seal.

    SST
    09308-00010  

    NOTICE:
    Be careful not to damage the oil seal and extension housing contact surface.