TRANSFER CASE OIL SEAL > REMOVAL

for Preparation Click here



1. DRAIN TRANSFER OIL


2. REMOVE LOWER TRANSFER CASE PROTECTOR


F043499

  1. Remove the 4 bolts and protector.



3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY

  1. Remove the front propeller shaft (Click here).



4. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY

  1. Using a chisel and hammer, loosen the staked part of the lock nut.



    F043429E01

  1. Using SST to hold the companion flange, remove the lock nut.

    SST
    09330-00021  



    F043430E01

  1. Using SST, remove the companion flange.

    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04051, 09957-04010, 09958-04011)



5. REMOVE TRANSFER CASE OIL SEAL


F043485E01

  1. Using SST, tap out the oil seal.

    SST
    09308-00010  

    NOTICE:
    Be careful not to damage the oil seal and case front contact surface.