LOAD SENSING PROPORTIONING VALVE > REMOVAL

for Preparation Click here



1. DRAIN BRAKE FLUID

NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.



2. DISCONNECT NO. 2 LOAD SENSING SPRING SHACKLE


C111606

  1. Remove the bolt, collar and 2 cushions.

  1. Disconnect the shackle from the rear differential.



3. REMOVE LOAD SENSING PROPORTIONING VALVE ASSEMBLY


C111607

  1. Using SST, disconnect the 3 brake lines from the valve body.

    SST
    09023-00101  

  1. Remove the 3 bolts and valve.