DECELERATION SENSOR (for 4WD) > INSTALLATION

for Preparation Click here



1. INSTALL DECELERATION SENSOR


F049832

  1. Install the sensor with the 2 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the sensor connector.



    F049831

  1. Install the sensor cover with the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }



2. INSTALL FRONT SEAT ASSEMBLY


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION

  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.