DTC    61-40    Mechanical Error of Media (AUDIO H/U)

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
61-40
Malfunction due to mechanical failure is identified, or cassette tape is cut or entangled.
  1. Cassette tape
  2. Radio receiver assembly

INSPECTION PROCEDURE

1.PRESS ''EJECT'' AND CHECK OPERATION

  1. Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.

    OK:
    Cassette tape is ejected.



NG
REPLACE RADIO RECEIVER ASSEMBLY
OK


2.CHECK CASSETTE TAPE

  1. Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.

    OK:
    No problem with cassette tape.



NG
CASSETTE TAPE IS FAULTY
OK


3.REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK

  1. Replace the cassette tape with a normal one and check if the same problem occurs again.

    OK:
    Malfunction disappears.



NG
REPLACE RADIO RECEIVER ASSEMBLY
OK

CASSETTE TAPE IS FAULTY