DTC    63-48    Excess Current

DTC    63-51    Elevator Error

DTC    63-52    Clamp Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
63-48
Overcurrent is present in CD changer.
Radio receiver assembly
63-51
Mechanical error occurred during elevator operation.
Radio receiver assembly
63-52
Failure in disc clamping or clamp error.
Radio receiver assembly

INSPECTION PROCEDURE

1.CHECK FOR DTC

  1. Delete the DTC.

  1. Check for DTCs again.

    OK:
    No DTC is output.



NG
REPLACE RADIO RECEIVER ASSEMBLY
OK

END