AUDIO AND VISUAL SYSTEM > CD cannot be Ejected

for Preparation Click here


INSPECTION PROCEDURE

1.PRESS ''EJECT'' AND CHECK OPERATION

  1. Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD ejects.

    OK:
    CD ejects.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK


2.REPLACE CD WITH ANOTHER AND RECHECK

  1. Replace the CD with a normal one and check that the CD ejects.

    OK:
    CD ejects.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK

CD IS FAULTY