AUDIO AND VISUAL SYSTEM > Tape is Tangled due to Incorrect Tape Speed or Auto-Reverse Malfunction

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK FOR FOREIGN OBJECT

  1. Check that the radio receiver cassette tape player is free from foreign objects.

    OK:
    No foreign objects.



NG
REMOVE FOREIGN OBJECT
OK


2.REPLACE CASSETTE TAPE WITH ANOTHER (90 MIN. OR LESS) AND RECHECK

  1. Replace the cassette tape with a normal one (90 minutes or less). Check that the malfunction disappears.

    OK:
    Malfunction disappears.



OK
CASSETTE TAPE IS FAULTY
NG


3.CLEAN HEAD AND CHECK OPERATION
I100153E03

  1. Raise the cassette door with your finger. Using a pencil or similar object, push in the guide.

  1. Using a cleaning pen or cotton applicator soaked in cleaner, clean the head surface, pinch rollers and capstans.

  1. Check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK

HEAD WAS DIRTY