AUDIO AND VISUAL SYSTEM > Cassette Tape cannot be Inserted or Played

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK FOR FOREIGN OBJECT

  1. Check that the radio receiver cassette tape player is free from foreign objects.

    OK:
    No foreign objects.



NG
REMOVE FOREIGN OBJECT
OK


2.CHECK CASSETTE TAPE

  1. Check that the cassette tape is a normal tape for recording sounds.

    OK:
    Cassette tape is normal.



NG
CASSETTE TAPE IS FAULTY
OK


3.REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK

  1. Replace the cassette tape with a normal one and check if the same problem occurs again.

    OK:
    Same problem does not occur.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK

CASSETTE TAPE IS FAULTY