Symptom
| Suspected area
| See page
|
Pressing power switch does not turn on system
| Pressing Power Switch does not Turn on System
|
Click here
|
Raid Receiver Power Source Circuit
|
Click here
|
Replace Radio Receiver Assembly
| -
|
Turning on lamp control switch does not activate nighttime illumination of radio receiver
| Illumination for Panel Switch does not Come on with Tail Switch On
|
Click here
|
Illumination Circuit
|
Click here
|
Replace Radio Receiver Assembly
| -
|
No sound can be heard from speakers (audio is mute)
| No Sound can be Heard from Speakers (Audio is Mute)
|
Click here
|
Speaker Circuit
|
Click here
|
Raid Receiver Power Source Circuit
|
Click here
|
Replace Radio Receiver Assembly
| -
|
Poor sound quality in all modes (low volume)
| Poor Sound Quality in All Modes (Low Volume)
|
Click here
|
Speaker Circuit
|
Click here
|
Raid Receiver Power Source Circuit
|
Click here
|
Replace Radio Receiver Assembly
| -
|
Radio broadcast cannot be received (poor reception)
| Radio Broadcast cannot be Received (Poor Reception)
|
Click here
|
Cassette tape cannot be inserted or played*
| Cassette Tape cannot be Inserted or Played
|
Click here
|
Cassette tape cannot be ejected*
| Cassette Tape cannot be Ejected
|
Click here
|
Sound quality is bad only when playing tape*
| Sound Quality is Bad Only when Playing Tape
|
Click here
|
Tape is tangled due to incorrect tape speed or auto-reverse malfunction*
| Tape is Tangled due to Incorrect Tape Speed or Auto-Reverse
|
Click here
|
CD cannot be inserted / played or CD is ejected right after insertion
| CD cannot be Inserted / Played or CD is Ejected Right After Insertion
|
Click here
|
CD cannot be ejected
| CD cannot be Ejected
|
Click here
|
Sound quality is bad only when CD is played (volume is too low)
| Sound Quality is Bad Only when CD is played (Volume is too low)
|
Click here
|
CD sound skips
| CD Sound Skips
|
Click here
|
Noise occurs
| -
|
Click here
|
