FRONT PROPELLER SHAFT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY


C098708E01

  1. Align the matchmarks on the yoke and differential flange.

  1. Connect the propeller shaft with the 4 bolts, 4 nuts and 4 washers.

    Torque:
    88 N*m{ 897 kgf*cm , 65 ft.*lbf }



    C098709E01

  1. Align the matchmarks on the yoke and transfer flange.

    Torque:
    88 N*m{ 897 kgf*cm , 65 ft.*lbf }