DTC    B2793    Transponder Chip Malfunction


DESCRIPTION

This DTC is output when: 1) during key code registration, a key malfunction occurs; or 2) the key code was unable to be registered properly.

DTC No.
DTC Detection Condition
Trouble Area
B2793
Transponder chip malfunction
Key

INSPECTION PROCEDURE

1.REREGISTER KEY

  1. Delete the DTC (Click here).

  1. Reregister the key, and check that the engine starts with the key.

    OK:
    Engine starts.



NG
REPLACE KEY
OK

NORMAL (INSPECTION FINISHED)