AIRBAG SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



READ DATA LIST

HINT:
Using the intelligent tester Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Read the Data List according to the display on the tester.

    Airbag ECU: 
    Item
    		Measurement Item/ Range (Display)
    		Normal Condition
    		Diagnostic Note
    Display Type Information
    		Display type identification information/
    LR: Display is indicated by LH/RH
    DP: Display is indicated by Driver/Passenger
    		DP / LR
    		-
    Number of Past DTC
    		Number of past DTCs recorded/ Min.: 0, Max.: 255
    		0
    		-