CAMSHAFT POSITION SENSOR > INSPECTION

for Preparation Click here



1. INSPECT CAMSHAFT POSITION SENSOR


    A112974E01

  1. Measure the resistance between terminals 1 and 2.

    Standard resistance:
    Temperature
    		Specified Condition
    Cold
    		835 to 1,400 Ω
    Hot
    		1,060 to 1,645 Ω

    NOTICE:
    In the table above, the terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

    If the resistance is not as specified, replace the sensor.