MASS AIR FLOW METER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE V-BANK COVER


    A112983

  1. Remove the 2 nuts and the V-bank cover.



3. REMOVE MASS AIR FLOW METER


    A111698

  1. Disconnect the MAF meter connector.

  1. Remove the 2 screws and MAF meter.

  1. Remove the O-ring from the MAF meter.