IGNITION COIL > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE INTAKE AIR CONNECTOR

  1. Disconnect the vacuum hose.

  1. Disconnect the No. 2 ventilation hose.

  1. Loosen the hose clamp and remove the 2 bolts and intake air connector.



3. REMOVE IGNITION COIL


A111720

  1. Disconnect the 4 ignition coil connectors.

  1. Remove the 4 bolts and pull out the 4 ignition coils.