CRUISE CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC (USING INTELLIGENT TESTER )
A098433E02

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Read the DTCs by following the directions on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC (USING INTELLIGENT TESTER )

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Erase the DTCs by following the directions on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.