VANE PUMP (for KD Series Engine) > REASSEMBLY

1. INSTALL VANE PUMP HOUSING OIL SEAL

2. INSTALL VANE PUMP SHAFT BEARING

3. INSTALL VANE PUMP SHAFT WITH BEARING

4. INSTALL VANE PUMP GEAR

5. INSTALL FRONT VANE PUMP SIDE PLATE

6. INSTALL VANE PUMP CAM RING

7. INSTALL VANE PUMP ROTOR

8. INSTALL REAR VANE PUMP HOUSING

9. INSPECT PRELOAD

10. INSTALL FLOW CONTROL VALVE

11. INSTALL POWER STEERING SUCTION PORT UNION