VANE PUMP (for 1GR-FE) > REASSEMBLY

1. INSTALL VANE PUMP HOUSING OIL SEAL

2. INSTALL SHAFT SUB-ASSEMBLY WITH PULLEY

3. INSTALL FRONT VANE PUMP SIDE PLATE

4. INSTALL VANE PUMP CAM RING

5. INSTALL VANE PUMP ROTOR

6. INSTALL REAR VANE PUMP HOUSING

7. INSPECT PRELOAD

8. INSTALL POWER STEERING OIL PRESSURE SWITCH

9. INSTALL FLOW CONTROL VALVE

10. INSTALL POWER STEERING SUCTION PORT UNION