VANE PUMP (for 1GR-FE) > DISASSEMBLY

1. FIX VANE PUMP ASSEMBLY

2. REMOVE POWER STEERING SUCTION PORT UNION

3. REMOVE FROW CONTROL VALVE

4. REMOVE POWER STEERING OIL PRESSURE SWITCH

5. REMOVE REAR VANE PUMP HOUSING

6. REMOVE SHAFT SUB-ASSEMBLY WITH PULLEY

7. REMOVE VANE PUMP ROTOR

8. REMOVE VANE PUMP CAM RING

9. REMOVE FRONT VANE PUMP SIDE PLATE

10. REMOVE VANE PUMP HOUSING OIL SEAL