STEERING COLUMN ASSEMBLY > REASSEMBLY

1. INSTALL STEERING MAIN SHAFT ASSEMBLY

2. INSTALL STEERING MAIN SHAFT BEARING

3. INSTALL KEY INTER LOCK SOLENOID

4. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY

5. INSTALL UNLOCK WARNING SWITCH ASSEMBLY

6. INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY

7. INSTALL STEERING LOCK OPERATION

8. INSTALL STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY

9. INSTALL TRANSPONDER KEY AMPLIFIER

10. INSTALL NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY

11. INSTALL STEERING SLIDING WITH COUPLING YOKE SUB-ASSEMBLY