FUEL SUPPLY PUMP > INSTALLATION


  1. INSTALL FUEL SUPPLY PUMP ASSEMBLY

  2. INSTALL TIMING BELT

  3. INSTALL NO. 1 TIMING BELT COVER

  4. INSTALL RADIATOR ASSEMBLY

  5. ADD AUTOMATIC TRANSMISSION FLUID

  6. ADD ENGINE COOLANT

  7. ADD FUEL

  8. TIGHTEN FUEL TANK CAP ASSEMBLY

  9. BLEED AIR FROM FUEL SYSTEM

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  11. PERFORM INITIALIZATION

  12. FUEL SUPPLY PUMP INITIALIZATION

  13. START ENGINE

  14. CHECK FOR ENGINE COOLANT LEAKS

  15. CHECK FOR OIL LEAKS

  16. CHECK FOR FUEL LEAKS

  17. INSTALL NO. 2 ENGINE UNDER COVER (for 4WD)

  18. INSTALL NO. 1 ENGINE UNDER COVER (for 4WD)